Hot Sale Yc 50Hz 60Hz 7.5 HP 5.5kw Single Phase Electric Motor

• Application: Industrial
• Speed: Constant Speed
• Number of Stator: Single-Phase
• Function: Driving
• Casing Protection: Protection Type
• Number of Poles: 4
• Model NO.: YCL-132M-4 7.5HP
• Starting Mode: y-δ Starting
• Certification: ISO9001, CCC, CE
• Brand: Liyuan
• Housing: Iron-Cast
• Cover: Iron-Cast
• Terminal Box: PPO
• Fan: PP
• Fan Cover: A3
• Shaft: C45
• Transport Package: Carton or Plywood
• Trademark: LIYUAN
• Origin: Fuan
• HS Code: 8501400000
• Production Capacity: 50000 Pieces/Year

Product Description

Hot Sale Yc 50Hz 60Hz 7.5 HP 5.5kw Single Phase Electric Motor

Recommendation

 

Product Description

Model	hp	kw	Current	Speed	Eff	Power Factor	Tst/Tn	Ist/In	Tmax/Tn
YCL-132M-4	7.5	5.5	32.5A	1430rpm	85%	0.9	2	6.5	1.8

Company Profile

FAQ

1. How to find the cause of vibration?
    
    
   To eliminate the vibration of the motor, we must first find out the cause of the vibration. Only by finding the cause of the vibration can we take targeted measures to eliminate the vibration of the motor.
    
    
   1. Before the motor is not shut down, use a vibration meter to check the vibration of each part. For the parts with large vibration, test the vibration value in three directions in the vertical, horizontal and axial directions. If the anchor screw is loose or the bearing end cover screw is loose, you can Directly tighten, and measure the vibration after tightening to observe whether it is eliminated or reduced. Secondly, check whether the three-phase voltage of the power supply is balanced and whether the three-phase fuse is blown. The single-phase operation of the motor can not only cause vibration, but also It will also make the temperature of the motor rise rapidly. Observe whether the pointer of the ammeter swings back and forth. When the rotor is broken, the current swings. Finally, check whether the three-phase current of the motor is balanced. If there is a problem, contact the operator to stop the motor in time to avoid burning the motor. damage.
    
    
   2. If the vibration of the motor is not resolved after the treatment of the surface phenomenon, continue to disconnect the power supply, untie the coupling, and mechanically separate the load connected to the motor. If the motor itself does not vibrate, it means the vibration source It is caused by the misalignment of the coupling or the load machine. If the motor vibrates, it means that there is a problem with the motor itself. In addition, the power failure method can be used to distinguish whether it is electrical or mechanical. When the power is cut off, the motor will not vibrate immediately or If the vibration is reduced, it is an electrical reason, otherwise it is a mechanical failure.