Y2 Series Preminum Quality Delta Connection 2 HP 1.5 Kw 3 Phase Motor

• Application: Industrial
• Speed: Constant Speed
• Number of Stator: Three-Phase
• Function: Driving
• Casing Protection: Protection Type
• Number of Poles: 4
• Model NO.: Y2-90L-4 2HP
• Starting Mode: y-δ Starting
• Certification: ISO9001, CCC, CE
• Brand: Liyuan
• Housing: Iron-Cast
• Cover: Iron-Cast
• Terminal Box: PPO
• Fan: PP
• Fan Cover: A3
• Shaft: C45
• Transport Package: Carton or Plywood
• Trademark: LIYUAN
• Origin: Fuan
• HS Code: 8501520000
• Production Capacity: 50000 Pieces/Year

Product Description

Y2 series preminum quality delta connection 2 hp 1.5 kw 3 phase motor

Recommendation

 

Product Description

 

Model	kw	HP	Current	Speed	Eff	Power Factor	Tst/Tn	Ist/In	Tmax/Tn
Y2-90L-4	1.5	2	3.65A	1400 rpm	79%	0.79	2.3	6.5	2.3

Company Profile

 

FAQ

1. The main points of structural design of DC motors are different from AC motors
    
   
   Base design control
   
   In motors that use seat-type bearings, the seat is symmetrical to the centerline of the armature core length. The determination of the size of the frame section mainly depends on the calculation of the magnetic circuit and the requirements of rigidity. The former is usually satisfied, and the latter is also often satisfied. The rigidity requirements of the DC motor base will be introduced separately. For large motors that undertake important tasks, sometimes the axial length between the front end cover of the commutator side and the front bearing needs to be increased, so that when the motor fails, the motor can be removed. The seat is moved away from the commutator for repair.
   
   
   
   Regardless of whether the end cover bearing or the seat type bearing is used, when choosing the height of the foot, it should be considered that the pole fixing screw can be installed and removed. If a split-half base is used, the position of the pole fixing screw should be considered at the same time when arranging its split-half position. For the sake of stability, for a motor fixed with feet, the vertical line passing through the center of mass of the base, or when using an end cover bearing, the vertical line passing through the center of mass of the entire motor must be within the outer line of the motor feet.