Preminum Quaity Yc 220V 7.5kw 10 HP Single Phase Electric Motor

• Application: Industrial
• Speed: Constant Speed
• Number of Stator: Single-Phase
• Function: Driving
• Casing Protection: Protection Type
• Number of Poles: 4
• Model NO.: YCL-132M-4 10HP
• Starting Mode: y-δ Starting
• Certification: ISO9001, CCC, CE
• Brand: Liyuan
• Housing: Iron-Cast
• Cover: Iron-Cast
• Terminal Box: PPO
• Fan: PP
• Fan Cover: A3
• Shaft: C45
• Transport Package: Carton or Plywood
• Trademark: LIYUAN
• Origin: Fuan
• HS Code: 8501400000
• Production Capacity: 50000 Pieces/Year

Product Description

Preminum quaity YC 220v 7.5kw 10 hp single phase electric motor

Recommendation

 

Product Description

Model	hp	kw	Current	Speed	Eff	Power Factor	Tst/Tn	Ist/In	Tmax/Tn
YCL-132M-4	10	7.5	43.2A	1460rpm	83%	0.95	2.1	6	1.8

Company Profile

FAQ

1. There are three main reasons for MOTOR vibration: electromagnetic reasons; mechanical reasons; electromechanical mixing reasons.
    
   1. Electromagnetic reasons
    
    
   1. In terms of power supply: the three-phase voltage is unbalanced, and the three-phase motor runs in phase loss.
   2. Stator: the stator core becomes elliptical, eccentric, and loose; the stator winding is broken, grounding breakdown, inter-turn short circuit, wrong wiring, and the three-phase current of the stator is unbalanced.
    
    
   Example: Before the overhaul of the sealed fan motor in the boiler room, red powder was found in the stator iron core, and it was suspected that the stator iron core was loose, but it was not an item within the scope of standard overhaul, so it was not handled. Troubleshoot after replacing a stator.
    
    
   3. Rotor failure: The rotor core becomes elliptical, eccentric and loose. The rotor cage bar and the end ring are open welded, the rotor cage bar is broken, the winding is wrong, and the contact of the brush is poor.
    
    
   For example: During the operation of the toothless saw motor in the sleeper section, it was found that the stator current of the motor swayed back and forth, and the motor vibration gradually increased. According to the phenomenon, it was judged that the rotor cage of the motor may be welded or broken. After the motor was disassembled, it was found that the rotor cage was broken in 7 places. , the two serious two sides and end rings have all broken, if not found in time, there may be a bad accident that may cause the stator to burn.